100% new raw material, stable supplier with stable quality
Model: PVC-3011
MOQ: 2000KGS
Payment Term: T/T, L/C
Delivery time: About 7 Working Days
Port Of Lading: Shanghai
Certification: SGS, MA
PRODUCT INTRODUCTION
PVC - Polyvinyl Chloride, film shrinks at low temperatures while maintaining its high density. PVC is the most commonly used material. It has good clarity, shrinks at multiple temps, and is very weather resistant. It is also the easiest to control during the process of shrinking while staying scuff resistant. The low cost of pvc shrink sleeves is a plus for most manufacturers and helps us provide lower rates to our buyers. Especially the PVC shrink sleeve film with the following characteristics:
- Excellent Transparency
- Consistent and uniform shrinkage
- Awesome printability
- Resistance to Moisture / Oil
- Excellent toughness and flexibility
- Good shrink ratio
- Fine surface luster
- Great compatibility with all shrink machines
- Low heat required for shrinkage
- Very neat appearance and see through display
- Good lay flat properties
- Effective functioning and speedy operations
Production Process
Raw Material-Mixed Raw Material-Blowing Film-Cutting-Packaging-Warehousing
Technical Data Sheet
Properties | Unit | Data | Test Method | ||
Thickness (Tolerance : ±10%) | μm | 35~50 | ASTM D374 | ||
Density | g/cm² | 1.38 | ASTM D792 | ||
Haze | % | ≤5 | ASTM D1003 | ||
Gloss(45°) | - | ≥90 | ASTM D2457 | ||
Yield | ㎡/kg | 35μm | 20.7 | -- | |
40μm | 18.1 | ||||
45μm | 16.1 | ||||
50μm | 14.5 | ||||
Coefficient of Friction | μs | - | ≤0.60 | ASTM D1894E | |
μk | 0.55 | ||||
Tensile Strength | MD | Mpa | ≥50 | ASTM D882 V=100mm/min | |
TD | ≥42 | ||||
Elongation At Break | MD | % | ≥50 | ||
TD | ≥70 | ||||
Heat Shrinkage (Tolerance : ±3%) | 60℃ | % | 1.4 | 34.7 | ASTM D1204 |
70℃ | 2.1 | 45.2 | |||
80℃ | 2.4 | 47.3 | |||
90℃ | 2.7 | 50.5 | |||
100℃ | 2.9 | 53 |
Product Advantages
For over 10 years we have dedicated ourselves to nature and its uniqueness.
Product Application
Poly Vinyl chloride (PVC) shrink film is remarkable for its transparency and easiness of molding, and it is considered as the most commonly used type of shrink film, which could be used in different areas to make the attractive shrink labels:
- Confectionery
- Beverages
- Cosmetics
- Packaged Mineral Water
- stationery
- Pharmaceutical
- Food supplement
- Oil and lubricant
- Electrical products and many more
Copyright © 2019 HUBEI HYF PACKAGING CO., LTD. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
Product Message
Please complete the form below, and our sales team will be in touch with you shortly.