Summarize the repair method of packaging film for you

The packaging film produced by packaging film manufacturers is mainly mixed and extruded from several different polyethylene resins, which have strong puncture resistance, so the packaging film will generally not be damaged, but after a long time of use, if you do not pay attention to storage , The probability of damage is very high. After damage, most people will choose to throw it away. Next, the packaging film manufacturer will share with you the repair methods of the packaging film. If you are eager to learn, you should read it carefully. 1. If the packaging film with a thicker texture is damaged, it can be covered with a packaging film of the same texture and connected with a thin thread. You can also wash the damaged area, cover the hole with a slightly larger packaging film, and then cover 2 to 3 layers of newspapers, and lightly iron along the joint with an electric iron. The two films will melt together after being heated. Stick together, this method is called hot melt method. 2. The packaging film manufacturer will introduce another method to you, that is, there is a glue repair method. Wash around the hole and apply it with a brush dipped in special glue. After 3 to 5 minutes, take a packaging film with the same texture. On the top, the glue can be attached firmly after it dries. Different repair methods have their own advantages and disadvantages, so you can try which method you are interested in. If you have any questions about other aspects, you are welcome to inquire, our packaging film manufacturer will serve you wholeheartedly. Author: On a xiaohong: packaging film manufacturer tells you the purchase of packaging film tips