Transparent High Shrink Film PVC Heat Shrink Film

PRODUCT INTRODUCTION

PVC (polyvinyl chloride) shrink film (printing grade) is one kind of the most economical and popular material for shrink sleeve packaging with good quality that is widely used in all kinds of packaging industry, such as food, beverage, cosmetics, personal care and other daily use.

Our PVC heat shrinkable film has great transparency, smoothness, stableness and perfect shrinkage.

Futhermore, the PVC shrink film is adaptable to various types of printing machines( Flexo, Gravure, etc.), and it makes the packaging of product bright, vivid, 360 brand experience and beautiful.

Main Specification

Material		PVC
Use		Shrink sleeve labels for wrapping beverage, Medicine, detergent, shampoo, etc.
Film Thickness		0.035-0.07 mm
Thickness Tolerance		±0.005 mm
Width		Up to 1000 mm
Film Shrinkage	TD	55 - 58%
	MD	2 - 5%
Tensile Strength (Mpa)	TD	≥70
	MD	≥42
Elongation At Break (%)	TD	≥100
	MD	≥400
Tearing Strength (KN/m)	TD	≥70
	MD	≥60

Production Process

Raw Material-Mixed Raw Material-Blowing Film-Cutting-Packaging-Warehousing

Raw Material:
100% new raw material, stable supplier with stable quality

Mixture of Raw Material:
4 sets Automatic Feeder meets the requirements of the production

Film Blown:
During this process, the technician will strictly control the quality (Especially the thickness & shrinkage) according to the customer’s requirement and product stardard.

Cutting:
3 cutting machines, each cutting machine could cut 7 tons per day.

Package:
All our film rolls are packed by insulation film for protecting the film from heat and are put horizontally above the pallet (Suspended pallet package). Then Each pallet is also coverd by insulation film.

Storage:
All ready products will be kept in the air-conditioned room below 25℃.

Technical Data Sheet

这里可以自定义设置

No	Test Item		Test Method	Unit	Standard	Test Result
1	Average Thickness Deviation		ASTM D374	%	±10%	3.75
2	Tensile Strength	MD	ASTM D882 V=100mm/min	MPa	≥40	58.5
2	Tensile Strength	TD	ASTM D882 V=100mm/min	MPa	≥100	161.5
3	Elongation	MD	GB/T 1040.2-2006	%	≥200	211.9
3	Elongation	TD	GB/T 1040.2-2006	%	≥30	74
4	Heat Shrinkage	MD	ASTM D1204	%	0-5	3
4	Heat Shrinkage	TD	90℃/10sec/Water	%	≥55	55
5	Haze		ASTM D1003	%	≤7	2.14
6	C.O.F.	us	ASTM D1894E	--	≤0.6	0.512
6	C.O.F.	uk	ASTM D1894E	--	≤0.55	0.33
7	Gloss(45°)		ASTM D2457	--	≥90	93
8	Transmittance		ASTM D1003	%	≥90	94.4
9	Wetting Tension		ASTM D2578	mN/m	≥38	≥38
10	Density		/	g/cm³	1.38±0.02	OK

Product Advantages

For over 10 years we have dedicated ourselves to nature and its uniqueness.

High Shrinkage( 55%-58%)

Normally, PVC shrink film is about 50%. Our hign shrink PVC shrink film could reach the shrinkage of 55%-58%. To some extent, it could be used instead of cast PVC shrink film in same shrinkage. In other words, more benefit could be in your pocket.

Stable Shrinkage

Stable Shrinkage is most important character of our PVC shrink film, which could been seen from how perfect of the seam line in the shrink labels after bottling.

Excellent Print-ability

Our PVC shrink film performs wonderful in printing, then it is no problem to print clear patterns with bright color and strong layers, making the shrink sleeve labels more attractive.

Product Application

$ View Details

PVC SHRINK FILM(Polyvinyl Chloride)is the most common shrink film type in the market now. Printing grade pvc shrink film is one kind of economic packaging material with good quality which is widely used in all kinds of packaging industry, such as shrink sleeve labels for cosmetics, beverages, edible oils, paints, pharmacy products, mineral water, juices, soft drinks, stationary and electrical industry products, etc.

PVC-3012 Transparent High Shrink Film PVC Heat Shrink Film 35mic-50mic