Product Introduction
PETG- Polypropylene Terephthalate Glycol (PETG) shrink film
1) Up to 78% shrink
2) PETG starts to shrink between 158°F and 176°F
3) Highest level of clarity
4) Most commonly used for our Energy Drink Shrink Labels
PET/PETG Shrink Films (PETG-2013)- is the Label Film printing material which is widely used for wrap full of the bottle with the feature of high tensile strength, good flatness and fit for wide printing, perfect printing performance for shallow network printing Even and high shrinkage and excellent thermal shrinking stability. Widely used for bottle (big diameter difference between bottleneck and body) film labelling, eg.beverage bottles packaging , cleaning and bathing products packaging and cosmetics packaging.
Product Parameters
Name | PETG Shrink Film |
Product number | PETG-2013 |
Brand | HYF |
Material | PETG (Glycol-modified Polyetthylene Teraphthalate) |
Thickness | 30mic - 50mic |
Width | 350mm - 1200mm |
Width Tolerance | ±5% |
Average Thickness Tolerance | ±10% |
Density | 1.32 g/cm³ |
Color | Transparent |
Supply Ability | 12,000 Tons Per Year |
Product Characteristics
Physical Property | High shrink rate: . Flushes beautifully against complex contoured surfaces and tight fit remains over time. . Reaches maximum shrinkage potential more quickly than competitive products(up to 78% ultimate shrinkage) . Higher shrinkage reached at lower temperatures-great for heat sensitive products |
Very High Gloss Percentage : Smooth, transparent, and glossy | |
Excellent Scuff Resistant : | |
The Most Heat Resistant material : | |
The Best Shrinkage Performance : | |
Environmental Health | Eco - Friendly and Easily Recycled : |
Technical Data Sheet
Excellent Smoothness. Great Printing Effect
Properties | Unit | Data | Test Method | ||
Thickness (Tolerance : ±10%) | μm | 35~50 | ASTM D374 | ||
Density | g/c㎡ | 1.32 | ASTM D792 | ||
Haze | % | 3.65 | ASTM D1003 | ||
Gloss(45°) | - | 110 | ASTM D2457 | ||
Dyne | mN/m | 40 | ASTM D2578 | ||
Yield | ㎡/kg | 35μm | 21.6 | -- | |
40μm | 18.9 | ||||
45μm | 16.8 | ||||
50μm | 15.2 | ||||
Coefficient of Friction | μs | - | 0.485 | ASTM D1894E | |
μk | 0.43 | ||||
Tensile Strength | MD | Mpa | 50 | ASTM D882 V=100mm/min | |
TD | 240 | ||||
Elongation At Break | MD | % | 430 | ||
TD | 390.84 | ||||
Heat Shrinkage (Tolerance : ±3%) | 60℃ | % | 0 | 0 | ASTM D1204 |
70℃ | 0 | 10 | |||
80℃ | -4 | 58 | |||
90℃ | 0 | 72 | |||
100℃ | 2 | 78 |
Product Advantages
For over 10 years we have dedicated ourselves to nature and its uniqueness.
Product Application
Due to PETG-2013’s high shrinkage, it is suitable for packaging with unique or curvy shape, especially bottles with high and narrow neck like wine bottles.
1) Full or partial body shrink sleeves
2) Full or partial body roll sleeves
3) Multi-packs
4) Tamper-evident bands
5) Wine capsules and disk plates
QUICK LINKS
CONTACT US
E-mail: info@plafilms.com
Tel / Fax: +86-27-83991169
Mobile / Whatsapp / Wechat:
+86-15327161968
Address: No. 387, Jiefang Avenue, Qiaokou District, Wuhan City, Hubei Province, China.
CONNECT WITH US